Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 112)

MiniMAC Rack Management System SMS-7000 Protection Switch Screens
Rev. 0 7–29
7.5.4.3 Load Prime/Backup Modem
Click on the LOAD PRIME MODEM OR LOAD BU-MODEM button.
To load a prime/backup modem with configuration changes:
1. Highlight the number in the LOAD PRIME/BACKUP MODEM field, and use
the increase/decrease arrows to select the appropriate modem number.
2. Choose [EXECUTE] to send the command, or [CANCEL] to abandon the
change. MiniMAC sends new configuration information from selected modem to
switch memory.
3. After the command has been transmitted, the command Accepted Message
window will appear.