Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 142)

SDM-300 Modem Screens MiniMAC Rack Management System
6–22 Rev. 0
6.6 Status Menu
Allows the user to request various status information about the modem. Status
information is not a command and the unit does not have to be in the REMOTE MODE.
The status information that can be requested are:
•
Equipment Type
•
Card 1 Options/Misc Type
•
M&C Firmware
•
Card 2 Type
•
ROM Firmware
•
Card 1 Options/Misc
•
Boot M&C Firmware
•
Card 2 Options/Misc
•
Modem Options/Misc
•
Serial Number
6.6.1 Status – Equipment Type Request
The most requested status is EQUIPMENT TYPE. This MiniMAC command allows the
user to verify communications to the device. Click on: EQUIPMENT TYPE