Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 58)

MiniMAC Rack Management System Other Devices
Rev. 0 9–17
To change a parameter:
1. For converter parameter information, refer to the appropriate installation and
operation manual for the selected converter.
2. Select a new parameter from the drop-down selection list to the right of a
parameter button, or type the new value in the field.
3. Select the parameter button to initiate the change. A verification prompt appears.
4. Choose [OK] to continue with the change, or [CANCEL] to abandon the change.
5. Continue selecting and confirming each parameter setting to be changed, until all
the parameters are correct.