Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 46)

MiniMAC Rack Management System Other Devices
Rev. 0 9–5
9.1.1.3 Modulator/Demodulator Commands
To access MODULATOR/DEMODULATOR COMMANDS, select Commands and
click on MODUALTOR/DEMODULATOR. The Configure Modulator/Demodulator
window will appear. To execute a change, click on the arrow to the right of the parameter
to be changed. Select a value from the drop-down menu. Click on the parameter button to
transmit the command. The Confirm Command Menu will appear. Click on OK. The
Command Accept Response window will confirm the command has been accepted.