Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 109)

SMS-7000 Protection Switch Screens MiniMAC Rack Management System
7–26 Rev. 0
7.5.3.9 Insert Data Input
On the INSERT DATA INPUT screen the user can select LOOP or NORMAL. This
function is only used when the Modem is in the D&I Mode of operation.
To change the Insert Data input data:
1. Select the Prime Channel by typing the number or use the increase/decrease
arrows to select the modem number.
2. Select Poll Status, Loop, or Normal.
3. Choose Execute to send the change.