Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 144)

SDM-300 Modem Screens MiniMAC Rack Management System
6–24 Rev. 0
6.7 Commands Menus
The command menus allow the user to change parameters on the modem. The modem
must be in the REMOTE MODE. This is performed in the SET CONTROL MODE
drop-down menu.
6.7.1 SDM-300 Commands
The user can set the following commands:
•
Interface
•
Modulator/Demodulator
•
AUPC/D&I
•
System/MUX PCB