Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 103)

SMS-7000 Protection Switch Screens MiniMAC Rack Management System
7–20 Rev. 0
To check the status of one or more demodulators:
1. Choose each DMD X field (where x is the number of the demodulator).
2. The status appears as the selected demodulator(s) are polled.
To change the active status of a demodulator:
Command Response
Select PRIME DEMODULATOR
Type Prime Demodulator Number or use the increase/decrease arrows (1-8).
Click on YES in the ACTIVE Field or NO.
Click on EXECUTE or CANCEL to abort the procedure