Comtech EF Data CRS-400 - Manual (Page 82)

CRS-400 1:8 Redundancy Switch Revision 0
Remote Control MN/CRS400.IOM
66
B.6 R
EMOTE
C
ONTROL
C
OMMANDS
Parameter
Type Command
(controller
to target) Argument
count Description of arguments
Note: All arguments are ASCII numeric codes between 48
and 57.
Responses
to
Command
(target to
controller) Query
(controller
to target) Response to Query
(target to controller)
Local/ Remote
Status LRS= 1 byte,
numerical,
0 or 1
Command or Query
Sets or queries the local/remote status of the Switch:
0 = Local
1 = Remote LRS=
LRS?
LRS# LRS? LRS=x
(see description of arguments)
Equipment ID n.a. 4 bytes,
ASCII Query only.
Switch returns information concerning the equipment
identification, with only a base switch “S400” currently in
use. n.a. EID? EID=xxxx
(see description of arguments)
Switch ID
string SID= 24 bytes,
ASCII
Command or Query.
Sets or queries the user-defined Switch ID string, which
is a fixed length of 24 characters.
Valid characters include:
Space ( ) * + - , . / 0-9 and A-Z. SID=
SID?
SID# SID? SID=xxxxxxxxxxxxxxxxxxxxxxxx
(see description of arguments)
Operating
Mode OPM= 1 byte,
numerical,
0 or 1
Command or Query.
Sets the operating mode:
0 = manual mode
1 = auto mode OPM=
OPM?
OPM*
OPM# OPM? OPM=x
(see description of arguments)
Switching
Mode SWM= 1 byte,
numerical,
0 or 1
Command or Query.
Sets the Switching mode:
0 = Dependent switching – Mods & Demods switched
together
1 = Independent switching – Mods & Demods switched
separately
Note: can only be changed if the OPM is manual AND
there are no units in back-up. ACM settings may be
affected.
SWM
SWM?
SWM*
SWM# SWM? SWM=x
(see description of arguments)
Active Mods ACM= 8 bytes,
numerical Command or Query.
Sets or queries the active state of all 8 Traffic Mods (or
Mod & Demods, if Dependent):
0 = de-activate Traffic Mod
1 = activate Traffic Mod
Note: only active units will be monitored by the switch. ACM=
ACM?
ACM*
ACM# ACM? ACM=xxxxxxxx
(see description of arguments)