Comtech EF Data CRS-400 - Manual (Page 68)

CRS-400 1:8 Redundancy Switch Revision 0
Remote Control MN/CRS400.IOM
52
A.4.4 (INFO) REMCONT (R EMOTE C ONTROL I NFO )
REM CNTL: REMOTE RS485-4W
ADDRESS: 5000 19200 8N1
This screen shows whether the unit is in LOCAL or REMOTE mode, and gives details of
the interface type selected, the switch address, the baud rate and character format. Press
ENTER or CLEAR to return to the previous menu.
A.4.5 (INFO) MASKS (A
LARM
M
ASK
I
NFO
)
ALARMS MASKED:
MOD DMD
Å
PSU-A PSU-B
Æ
This screen shows which alarms are currently masked. If an alarm is not masked, a blank
is displayed in the relevant screen position. Power Supplies A and B cannot be masked at
the same time, but are shown together here to indicate their relative positions.