Comtech EF Data RCS11 - Manual (Page 75)

RCS11 1:1 Redundancy Switch Connector Pinouts
MN-RCS11 – Revision 9 5–17
59 IDR ESC Transmit 8 Kbps Data (B) + Output
60 IDR ESC Receive 8 Kbps Clock (B) + Input
61 IDR ESC Receive 8 Kbps Data (B) + Input
62 IDR ESC Backward Alarm 4 Normally Open
63 IBS Transmit Octet (B) + Output
64 Synch Data - Data Mode (B) + Input
65 Synch Data - Clear to Send (B) + Output
66 IBS Receive Octet (B) + Input
67 Synchronous Data Request to Send (B) + Output
68 Synchronous Data Receiver Ready (B) + Input
5.8.3 ESC 8K DATA (J15)
The ESC 8K Data Port is a 15-Pin Female ‘D’ Connector. Refer to Table 5-20 for pinouts.
Table 5-20. ESC 8K Data Interface - 15-Pin Female ‘D’ Connector (J15)
Pin No. Description Signal
1 Rx Octet-B Output
2 Rx Clock-B Output
3 Rx Data-B Output
4,5 Not Used N/A
6 Tx Data-A Input
7 Tx Clock-A Output
8 Tx Octet-A Output
9 Rx Octet-A Output
10 Rx Clock-A Output
11 Rx Data-A Output
12 Ground GND
13 Tx Data-B Input
14 Tx Clock-B Output
15 Tx Octet-B Output
5.8.4 ESC VOICE (J16)
The ESC Voice Port is a 9-Pin Female ‘D’ Connector. Refer to Table 5-21 for pinouts.
Table 5-21. ESC Voice - 9-Pin Female ‘D’ Connector (J16)
Pin No. Description Signal
1 Tx Audio 1A Input
2 Rx Audio 1A Output