Comtech EF Data RCS11 - Manual (Page 25)

MN-RCS11 – Revision 9 2–1
Chapter 2. Theory of Operation
2.1 Theory of Operation
2.2 RCS11 Operation
A block diagram of the signal flow is shown in Figure 2-1 below.
Figure 2-1. Functional Block Diagram
2.2.1 Operating Procedures
The RCS11 is designed to require minimal operator intervention and control during normal
operation. After initial setup, the unit should operate in a relatively ‘transparent’ manner,
providing trouble-free backup of the online Modems. The scope of this section is limited to
instruction on the various modes of control available to the operator. Refer to Section 3-1 for the
RCS11 Front Panel Controls and Indicators and Table 3-1 for a description of the Controls and
Indicators.