Comtech EF Data RCS11 - Manual (Page 48)

RCS11 1:1 Redundancy Switch Installation
MN-RCS11 – Revision 9 4–10
4.6.7 DMD50 or DMD2050 T3 E3 STS1 With IDR/ESC
Figure 4-7 illustrates a 1:1 system using a RCS11 with the T3 E3 STS1 Interface connected to
DMD50 or DMD2050 Modems with 70/140 MHz and T3/E3 Interface. Table 4-7 describes the
connection hardware required.
Figure 4-7. RCS11 with a E3/T3 STS1 Interface Connected to a DMD50 or DMD2050
Modems with a IDR/ESC Interface
Table 4-7. Connection Hardware
Item No. Quantity Part Number Discription
1 1 RF/ZSC-2-175 70/140 IF Splitter
2 8 CA/3598-36 3’ BNC to BNC 75 Ohm Coaxial Cable
3 2 CA/3407-3 3’ Data/Fault Cable