Comtech EF Data RCS11 - Manual (Page 49)

RCS11 1:1 Redundancy Switch Installation
MN-RCS11 – Revision 9 4–11
4.6.8 DM240 PIIC ASI Interface
Figure 4-8 illustrates a 1:1 system using a RCS11 with the ASI Interface connected to DM240
PIIC Modulators with 70/140 MHz and ASI PIIC Card. Table 4-8 describes the connection
hardware required.
Figure 4-8. RCS11 with ASI Interface Connected to DM240 PIIC
Modulators with an ASI PIIC Card
Table 4-8. Connection Hardware
Item No. Quantity Part Number Discription
1 2 CA/3598-36 3’ BNC to BNC 75 Ohm Coaxial Cable
2 2 CA/3677-1 Alarm Fault Cable
3 2 CA/3598-36 3’ BNC to BNC 75 Ohm ASI Cable