Beisler 100-68 - Manual (Page 93)

5. Main screen
On the main screen the seam pattern, the seam program, the selected
pocket sequence as well as important seam functions are displayed.
The seam functions can be individually selected by the user.
Seam pattern
The left half of the display shows the seam pattern of the selected
seam program.
Storage location and seam program
The top right corner of the display shows the program number and the
selected pocket sequence.
– Move the cursor to the desired seam program number.
– Press the return key.
The seam program is activated.
– Press the return key.
The seam program is deactivated.
NOTE !
If no seam program is active, an error message is produced.
9
4