Beisler 100-68 - Manual (Page 21)

4. Working methods
The individual working methods for trousers and men’s jackets are
described on the following pages.
The description is structured as follows:
Feeding positions
This item indicates the feeding points for the different workpieces (e.g.
left and right parts).
Aligning the positioning aids
Here you will find a description how to adjust and align the positioning
aids (e.g. positioning marks, marking lamps, guides etc.).
Feeding and starting the sewing process
Here you will find a list of the individual feeding steps with
practice-oriented examples.
ATTENTION!
The steps of the feeding process are dependent on the equipment of
the respective sewing unit.
So the feeding steps described in the examples apply to sewing units
with the same equipment only.
Caution: Risk of injury!
Do not reach under the downholder, the transport clamp and the folder
during the feeding process.
1
19