Beisler 100-68 User Manual

Page 43

Raising the machine head
–

Swivel the folding station 1 aside by 90°.

–

Swivel the fabric sliding sheet 2 to the left.

–

Unscrew the fastening screw 6.

–

Loosen the screw at the locking lever 4 and raise the holder.

–

Tighten the screw.

–

Lift the machine head in the area of the head cover 3 and raise it
cautiously.

–

Lower the machine head a little again until catch 5 snaps in.
The area underneath the sewing machine head is accessible for
cleaning and adjusting now.

Caution: Risk of injury!

Do not reach into the cutout of the table top when the machine head is
raised.

Swinging the machine head back
–

Hold the machine head tight.

–

Lift the machine head cautiously until catch 5 releases.

–

Lower the machine head cautiously into the cutout of the table top.

–

Swivel the fabric sliding sheet back again and let it catch.

–

Loosen the screw at the locking lever 4.

–

Swivel the lever downwards.

–

Tighten the fastening screw 6 again.

–

Swivel the folding station back until it snaps in catch 5.

–

Tighten the screw at the locking lever 4.