Beisler 100-68 - Manual (Page 133)

6.6.4 Storing and loading program data with the USB stick
A customary USB stick is used for the long-term storage of sewing
programs and the transfer of the sewing unit software.
By means of the USB stick sewing programs, seam patterns and
machine parameters can be transferred to other sewing units.
6.6.4.1 Saving data on a USB stick
Machine parameters, program sequences and seam programs can
individually be transferred to the USB stick.
ATTENTION!
During the data transfer to the control the sewing unit must not be
switched off.
When transferring programs from one sewing unit to another only
transfer the program sequences and seam programs.
49
4