Electrical connection – Beisler 100-68 User Manual
Page 34
3.
Electrical connection
ATTENTION!
Any work on the electrical equipment of the sewing unit must
only be carried out by electricians or correspondingly instructed
persons.
The mains plug must be pulled out.
3.1
Connecting the DACIII control panel
–
Put the control panel 1 in the holder 2 and screw it tight.
–
Push the plug 3 into the control panel cautiously.
–
Secure the plug with the two screws.
3.2
Making the mains connection
–
Connect the mains plug.
4
3
2
1