Beisler 100-68 - Manual (Page 88)

2. Operating terminal
The data input and output is done via a touch screen.
Colour display
Function-
symbols
Escape key OK key Cursor keys
Return key
Key/ Key group Function
Cursor keys Select function / parameter.
v, w : Select symbol of the desired function/ parameter
r,s : Switch function / parameter on/off,
select previous/ next step of the value,
activate the test program
Escape key Display the old value again.
OK key Open window to set the selected function/ parameter.
Take over the set value.
Function symbols Direct selection of function/ parameter.
2.1 Operating the touch screen monitor
To start a function touch the screen with a fingertip where the
corresponding symbol is displayed.
–
Tap the desired function symbol with the tip of your finger.
4