Beisler 100-68 - Manual (Page 56)

3.5.3 Adapting the folding slide
Caution: Risk of injury!
Switch the main switch off.
Check and adjust the folding slide only with the sewing unit switched
off.
Standard and checking
The rotation of the folding slide 1 must be guaranteed so that it can
automatically adapt itself to the thickness of the material to be
processed.
The folding slide 1 must have no axial backlash.
–
Check the folding slide 1 in the holder for lateral clearance.
Correction
–
Loosen the counternut 2.
– Adjust the folding slide with Allen screw 3 in such a way that there
is neither clearance nor rough rotation.
– Tighten the counternut 2.
18
3 2 1