Beisler 100-68 User Manual
Page 129

6.6.2.7 Testing the sewing motor
With this program the sewing motor is tested.
ATTENTION !
Pull the threads out of the needles and the thread lever.
–
Tap the icon.
–
Enter the desired speed.
–
Tap the icon.
The sewing motor runs at the set speed.
–
Tap the icon.
The sewing motor stops in reference position and the value is
indicated in the display “position”.
Example : 355
–
Tap the icon.
–
Enter the desired speed for thread trimming.
–
Tap the icon.
The sewing motor is switched on.
Afterwards the sewing motor stops automatically and the thread
trimmer is actuated.
45
4