Beisler 100-68 - Manual (Page 112)

Testing inputs/ outputs
Inputs Outputs
ATTENTION !
The input elements have been carefully set by the manufacturer.
Settings and corrections must only be done by trained service
personnel.
Caution: Risk of injury !
Do not reach into the running machine during the function test.
Testing input elements
– Change between the basic module (inputs S1 to S104) and the
CAN node (inputs SC101 to SC110) with the key “CAN”.
– Tap the key “S?”.
The “numeric pad” is opened.
– Enter the code number of the desired input element (see tables).
– Tap the key “OK”.
– Actuate the input element and check the switching state at the
display.
In the field 1 the designation and the switching state (+/-) of the
actuated input is displayed.
– Tap the function key “ESC” to quit the menu.
NOTE !
It is also possible to test several inputs one after the other.
28
1