V o l – Avery Dennison 6035 Programmer Manual Rev.A 7/98 User Manual

Page 179

Text mode
Original mode

7/9/98

ROM-DOS 6.22 Command Descriptions 3-121

V O L

Internal

Purpose

Displays the volume label on a specified disk.

Syntax

VOL <drive:>

Remarks

If you do not specify a Drive, then the default drive is assumed. VOL
does not allow the setting of volume labels. Refer to the LABEL
command for instructions on setting the volume labels.

Examples

A>VOL

Causes ROM-DOS to display the volume label on the default drive
which is the a: drive.

A>VOL c:

Causes ROM-DOS to display the volume label on the c: drive.