Avery Dennison 6035 Programmer Manual Rev.A 7/98 - Manual (Page 134)

3-76 ROM-DOS 6.22 User Manual 7/9/98
L O A D H I G H
Internal
Purpose
Loads an executable or TSR into the upper memory area if available.
LOADHIGH can be run as a batch subcommand or from the DOS
command line.
Syntax
LOADHIGH = executable [arguments]
or
LH = executable [arguments]
Remarks
An executable or TSR program can be loaded into the upper memory
areas if they are available and there is enough free upper memory to
accommodate the program’s needs. To make high memory available,
the EMM386.EXE and HIMEM.SYS utilities must be loaded. If these
utilities are not loaded or there is not enough upper memory available,
the program loads into conventional memory.
The full drive path and file name of the device must be specified. The
arguments are different depending on the device driver.
Examples
LOADHIGH=c:\apps\checkit.exe /p
Installs an executable called CHECKIT as specified. The program
loads into upper memory if available.