Avery Dennison Platinum 6039 System Administrator Guide - Manual (Page 40)

Configuring Code 93 Bar Codes
1. To configure Code 93 settings, tap Code 93 from the Scanner
Configuration screen.
2. Enable each bar code you need to scan.
Code 93 Allows the scanner to scan Code 93 bar codes.
Lengths
Sets the
length(s)
for Code
93 bar
codes. Variable, specifies that Code 93 bar codes can be any
length.
Note: Specifying a range of lengths increases the
likelihood of unsuccessful scans.
1 Fixed, specifies a single length for valid Code 93 bar
codes. The range for Length 1 is 2 – 99. The default
is 4.
2 Fixed, specifies two lengths for valid Code 93 bar
codes. The range for Length 2 is 2 – 99. The default
is 55.
3. Tap OK to save all the settings and return to the Scanner Configuration screen.
Configuring D 2of5 Bar Codes
1. To configure D 2of5 settings, tap D 2of5 from the Scanner
Configuration screen.
2. Enable each bar code you need to scan.
D 2of5 Allows the scanner to scan D 2of5 bar codes.
Lengths
Sets the
length(s)
for D
2of5 bar
codes. Variable, specifies that D 2of5 bar codes can be any
length.
Note: Specifying a range of lengths increases the
likelihood of unsuccessful scans.
1 Fixed, Specifies a single length for valid D 2of5 bar
codes. The range for Length 1 is 2 – 99. The default is
12.
2 Fixed, Specifies two lengths for valid D 2of5 bar
codes. The range for Length 2 is 2 – 99. The default is
0.
3. Tap OK to save all the settings and return to the Scanner Configuration screen.
Configuring RSS Bar Codes
1. To configure RSS settings, tap RSS from the Scanner
Configuration screen.
2. Enable each bar code you need to scan.
RSS 14 Allows the scanner to scan RSS 14 bar codes.
RSS
Limited Allows the scanner to scan RSS Limited bar codes.
RSS
Expanded Allows the scanner to scan RSS Expanded bar codes.
RSS to
UPC/EAN Tells the scanner to convert RSS bar codes into an
UPC/EAN bar code.
3. Tap OK to save all the settings and return to the Scanner
Configuration screen.
5-8 System Administrator’s Guide