Avery Dennison Platinum 6039 System Administrator Guide - Manual (Page 20)

7. When you are finished, tap the Main tab. Your new profile appears in the Active Profile
drop-down menu.
8. Select your new profile from the drop-down menu. The printer connects to the network
based on your settings.
About ThirdPartyConfig
The ThirdPartyConfig profile allows you to configure the printer’s wireless settings using
Windows Zero Config (WZC) instead of the Summit Client Utility. When you select this profile,
the printer automatically turns off and back on and launches WZC.
We recommend using the Summit Client Utility to configure the Summit 802.11g wireless card.
Setting a Password
You can set or change the SCU Admin password. The default is SUMMIT.
Note: Make a note of the password if you change it. The Admin password restricts all access
to wireless settings.
1. From the main screen, tap Admin Login.
2. Enter the password. The default password is SUMMIT. Tap OK.
3. Tap the Global tab.
4. Scroll down the Property menu until you see Admin Password.
3-10 System Administrator’s Guide