Avery Dennison Platinum 6039 System Administrator Guide - Manual (Page 13)

5. Tap the Authentication tab and specify the authentication security settings. The options a
None, re
Kerberos, EAP-TLS, or PEAP.
not
6. e encryption settings.
ect.
DHCP or Static.
8. sary.
9.
10. Tap
These settings must match the network authentication settings or the printer can
connect.
Tap the Encryption tab and specify th
The options are Open System (no security), WEP, or TKIP (WPA).
These settings must match the network encryption settings or the printer cannot conn
7. Tap the IP Config tab and select the IP type. The options are
Tap the Power tab and adjust the radio transmission power, if neces
When you are finished, tap OK. You return to the desktop.
can t or change the Mobile Companion access p
, WLAN Profiles. The new profile is listed.
You se assword. The default is Disabled.
Setting a Password
1. Tap , Options.
To ch nge a curren
2. Tap Change Password.
3. To enable password protection, enter and confirm a new password.
a t password, enter the current password, then enter and confirm a
ot specify a new
4.
5.
Not note of the password if you change it. Setting a password restricts all access to
ss features.
new password.
To disable password protection, enter the current password but do n
password.
Tap OK.
Tap X in the upper-right hand corner of the screen to exit the application.
e: Make a
wirele
Configuring Wireless Settings 3-3