Avery Dennison Platinum 6039 System Administrator Guide - Manual (Page 31)

Testing the Keypad
1. Tap Keypad Tests from the Printer Diagnostics screen.
2. Press the key you want to test. The key pressed appears on the display. If you press
Enter, the word “Enter” appears on the display.
3. Tap Back to return to the Printer Diagnostics screen.
OR
Tap Done to return to the desktop.
Testing the Speaker
1. Tap Speaker Test from the Printer Diagnostics screen to perform the speaker test.
2. Tap Run Test. While the test is performed, you hear a tone sounded at each frequency
(200 Hz – 6400 Hz). The frequencies are displayed for each tone.
3. Tap Back to return to the Printer Diagnostics screen.
OR
Tap Done to return to the desktop.
Using Printer Diagnostics 4-9