Auto-Zone Control Systems Auto-Zone Plus Systems Installation & Operation (Version 03A) - Manual (Page 135)

Auto-Zone Plus Section 3
Programming 3-49
Zone Manager
Scheduling, Holidays and
Optimal Start
If the Unit ID you entered was for a Zone Manager, the following menu will appear.
Scheduling/Holiday/Optimal Start Menu
Week Schedules
Schedule Start/Stop Time for Event #1 & #2
Note: The second line displays which day of the week is currently being
programmed. This automatically increments as you finish the Stop Time and
continue to the next Start Time screen.
1) Week Schedules
2) Holidays
3) Optimal Starts
ESC) Previous Menu
This menu appears whenever the user accesses the Scheduling
functions. It allows the user to choose between Schedules,
Holidays or Optimal Starts.
Zone Manager
Sunday Event #1
Start Time..: 0
Stop Time...: 0
Zone Manager
Sunday Event #2
Start Time..: 0
Stop Time...: 0
The screens will step through the Start Time and then the Stop
Time for each day of the week. You can quit at any point in the
process by pressing the "ESC" key. After the Stop Time for
Event #1 is entered, the screen for Event #2 will come up.
All times are in 24-hour format, so 5:00 PM would be entered
as 1700.
If both the Start and Stop Times are ZERO, the schedule is in a
Continuous OFF mode.
If both the Start and Stop Times are 2359, the schedule is in a
Continuous ON mode.