Auto-Zone Control Systems Auto-Zone Plus Systems Installation & Operation (Version 03A) - Manual (Page 104)

Section 3 Auto-Zone Plus
3-18 Programming
Configuration Screen #7
Configuration Screen #8
Configuration Screen #9
Configuration Screen #10
Configuration Screen #11
The Zone Manager has the ability to control the Economizer
operation. To initiate Economizer operation, select YES, if
there is no economizer or it is being controlled by other means,
then select NO. To toggle between the two Economizer modes,
use the Left/Right Arrow keys. ECONOMIZER CONTROL
Handled by AHU.: YES
Use Left/Right Arrow
COOLING CONTROL TYPE
COOLING VALVE MODE
Use Left/Right Arrow
The Zone Manager has the ability to control the cooling by one
of two methods. Cooling Valve Mode is a modulating chilled
water valve; DX Stage Cooling is up to six stages of cooling.
To toggle between the two modes, use the Left/Right Arrow
keys.
HEATING CONTROL TYPE
HEATING VALVE MODE
Use Left/Right Arrow
The Zone Manager has the ability to control the heating by one
of two methods. Heating Valve Mode is modulating a hot
water valve, Staged Heat Mode is up to six stages of heating.
To toggle between the two modes, use the Left/Right Arrow
keys.
If you have DX Cooling on your HVAC unit and selected that
option in Configuration Screen #8, this screen will appear.
Enter the number of DX cooling stages you have here. DX COOLING CONFIGURE
Cooling Stages...:2
If you have Staged Heating on your HVAC unit and selected
that option in Configuration Screen #9, this screen will appear.
Enter the number of heating stages you have here. HEAT CONFIGURATION
Heating Stages...:2