Functional description, 1 overview, 2 features – Artesyn MVME3100 Single Board Computer Installation and Use (June 2014) User Manual
Page 69: 1 overview 4.2 features, Table 4-1, Mvme3100 features summary, Chapter 4

Chapter 4
MVME3100 Single Board Computer Installation and Use (6806800M28E)
69
Functional Description
4.1
Overview
This chapter describes the MVME3100 and the MVME721 rear transition module (RTM) on a
block diagram level.
4.2
Features
The following tables list the features of the MVME3100 and its RTM.
Table 4-1 MVME3100 Features Summary
Feature
Description
Processor/Host
Controller/Memory Controller
– Single 833 MHz MPC8540 PowerQUICC III™ integrated processor
(e500 core)
– Integrated 256KB L2 cache/SRAM
– Integrated four-channel DMA controller
– Integrated PCI/PCI-X controller
– Two integrated 10/100/1000 Ethernet controllers
– Integrated 10/100 Ethernet controller
– Integrated dual UART
– Integrated I2C controller
– Integrated programmable interrupt controller
– Integrated local bus controller
– Integrated DDR SDRAM controller
System Memory
– One SODIMM socket
– Up to DDR333, ECC
– One or two banks of memory on a single SODIMM
I
2
C Interface
– One 8KB VPD serial EEPROM
– Two 64KB user configuration serial EEPROMs
– One real-time clock (RTC) with removable battery
– One temperature sensor
– Interface to SPD(s) on SODIMM and P2 for RTM VPD
Flash
– 128MB soldered Flash with two alternate 1MB boot sectors selectable
via a hardware switch
– Hardware switch or software bit write protection for entire logical bank