Artesyn MVME3100 Single Board Computer Installation and Use (June 2014) - Manual (Page 140)

Specifications
MVME3100 Single Board Computer Installation and Use (6806800M28E) 140
A.3 Thermally Significant Components
The following table summarizes components that exhibit significant temperature rises. These
are the components that should be monitored in order to assess thermal performance. The
table also supplies the component reference designator and the maximum allowable
operating temperature.
You can find components on the board by their reference designators. Versions of the board
that are not fully populated may not contain some of these components.
Product Damage
 High humidity and condensation on surfaces cause short circuits.
 Do not operate the product outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying
power.
Table A-3 Thermally Significant Components
Reference Designator Generic Description
Max. Allowable Component
Temperature (Celsius) Measurement
Location
U1012 Processor 0ºC to 105ºC/32°F to 221°F Junction
XU1 Memory 0ºC to 70ºC/32°F to 158°F Ambient
U21 VME Bridge 0ºC to 70ºC/32°F to 158°F Ambient
U1009, U1010 PCI Bridge 0ºC to 70ºC/32°F to 158°F Ambient
U5000 SATA Controller -0ºC to 70ºC/32ºF to 158ºF Ambient
U1028, U1029 Gigabit Ethernet 0ºC to 70ºC/32°F to 158°F Ambient
U1039 Ethernet 10/100 PHY -40ºC to 85ºC/-40ºF to 185ºF Ambient
U1051, U1052 Clock Driver -40ºC to 85ºC/ -40ºF to 185ºF Ambient
U1054 Programmable Logic Device 0ºC to 85ºC/ 32ºF to 185ºF Junction