AMETEK 2001RP - Manual (Page 19)

User and Programming Manual - Rev R
2001RP 9
2.8 Front Panel Controls
Parameter Specification
Controls: Shuttle knobs:
Allows continuous change of Voltage, Frequency and Current
limit. Voltage change is inactive on single voltage range
configuration units.
Function keys:
Controls Output state, Voltage range and Display mode.
Displays: Two, 4 digits, 0.5” LCD display. For viewing programmed voltage,
frequency, current limit and for displaying measured current.
Status Indicators: 10 LEDs to indicate:
REMOTE, FAULT, OUTPUT (ON/OFF), VOLTAGE RANGE
HIGH, VOLTAGE RANGE AUTO
FREQUENCY, CURRENT, PEAK CURRENT, POWER, POWER
FACTOR DISPLAY MODES (Refer to paragraph 4.1.2).