AMETEK 2001RP - Manual (Page 11)

User and Programming Manual - Rev R
2001RP 1
1 Introduction
This instruction manual contains information on the installation, operation, calibration and
maintenance of the 2001RP AC power source.
1.1 General Description
The 2001RP AC source is a high efficiency, lightweight, 2000 VA programmable AC power
source. In addition to the standard 2001RP model, several options are available that may
change the voltage and frequency ranges of the power source. This user manual covers the
following models:
Model Voltage ranges Max. Current Frequency range
2001RP 150 V
RMS
300 V
RMS
13. 4 A
RMS
6.7 A
RMS
16 Hz – 5000 Hz
2001RP-AV
1
115 V
RMS
230 V
RMS
Avionics version
17.4 A
RMS
8.7 A
RMS
360 Hz – 5000 Hz
2001RP-LZ
Low impedance version
135 V
RMS
270 V
RMS
14.8 A
RMS
7.4 A
RMS
16 Hz – 500 Hz
Table 1-1: Available models
The output voltage High and Low terminals are isolated from the chassis, earth ground. The
nominal input can be either 103 V
RMS
to 127 V
RMS
AC or 187 V
RMS
to 253 V
RMS
AC at 47 Hz to
400 Hz line frequency.
Simple front panel controls enable the voltage, current limit and frequency to be changed.
An optional RS232C and IEEE 488 interface is available for applications that require remote
control and measurements.
1.2 Accessory Equipment/Rack Slides
General Devices Company Model C300-120-B308 rack slides may be attached to the sides
of the power source using 10-32 X 3/8 flat head screws.
1
2001RP-AV models may be factory configured with a single voltage range and fixed frequency output.