WaveWare Adaptive AlphaNet - Manual (Page 34)

Step-by-step tutorial in setting up connection devices, sites, and groups
34 2 — Installing AlphaNET™ 3.0 software and setting up sites
11. N
ext, enter information on the Sign Info tab:
Table 10: Sales setup (2 of 4): Site Editor (Sign Info) window
Item Name Directions
A
Tone on
Receipt See “R & D setup (2 of 4): Site Editor (Sign Info)
window” on page 31.
B Address List
The addresses of the Sales signs are01 and 02:
C Counter File... See “How to edit a counter file” on page 81.
D
Automode
File…
Choose an automode table, if desired. (Compatibility on
the Site Info tab must be Alpha 2.0 or Alpha 3.0 for
Automode Table… to be available.)
See “How to create and use a custom automode
sequence” on page 107 for more information.
E Tune File
Signs in the address list can play a tune file each time
they receive a message. To do this, select Tone on
Receipt >Tune File. Then browse and select one of the
pre-programmed tune files. Only available on an
AlphaPremiere™ 9000 sign.
F Duration In seconds, the length of time each beep will sound.
G Repeat
The number of times the beep (or series of beeps) will
sound.
H
Extended
Memory
Used for large file transmissions, such as when sending
graphics to a display sign. Must be selected when
sending to an AlphaPremiere™ 9000 or AlphaEclipse™
sign.
D
A
C
E
B
F
G
H
H I N T
A long sequence of sign
addresses can be entered using a
hyphen.
For example, the address list:
5,6,7,8,9 could also be entered
as 5–9.
Addresses of the Sales
signs
(See NOTE at the end of
this example.)
Sales 01
Sales 02