TelVue HyperCaster® User Manual

Page 12

TelVue HyperCaster

User Manual / v5.0 / October 2014

is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com

4. Click the Quickconnect button. Your import folder (directory), which is usually vol1, is displayed in

the Remote site pane on the right. If your server has multiple volumes you will be taken to the
highest-level folder.

5. In the Local pane on the left, browse for the file you want to transfer to your server.
6. Drag the file into your import folder.

Once the content is in your import folder you will use the Import function to make the content
available for programming.

Running FTP with Internet Explorer

Before using FTP to transfer files, make sure it is set to Active Mode.

1. Open an Internet Explorer window and type ftp://nnn.nnn.nnn.nnn in the address window, where

nnn.nnn.nnn.nnn is the IP address of your TelVue HyperCaster.

2. In the upper right of the window, click on Page, then choose Open FTP Site in Windows Explorer.

3. In the Login As dialog box, enter your username and password. (The default username and password

are both psguser.) Click Log On to open the FTP folder, which is usually vol1. If your server has
multiple volumes you will be taken to the highest-level folder.