CIRCUTOR CVM-C10 Series User Manual
Page 58
even parity.
odd parity.
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
Number of data bits
The number of data bits of Modbus communications are
programmed on this screen.
Press key
for 3 seconds to edit the bit number selection. The
prog icon will be displayed on the bottom of the screen.
Press key
to browse the two options:
7 or 8 bits.
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
Number of Stop bits
The number of Stop bits of Modbus communications are
programmed on this screen.
Press key
for 3 seconds to edit the Stop bits number
selection. The
prog icon will be displayed on the bottom of the
screen.
Press key
to browse the options:
1 or 2 bits.
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
4�9�28�2 BACnet protocol
Note: Protocol available in units with version 3.00 or higher.
Transmission speed
The transmission speed of BACnet communications is
programmed on this screen.
Press key
for 3 seconds to edit the transmission speed
selection. The
prog icon will be displayed on the bottom of the
screen.
Press key
to browse the two options:
9600 or 19200.
58
CVM-C10
Instruction Manual