CIRCUTOR CVM-C10 Series - Manual (Page 36)

4.9.- PROGRAMMING
From the programming menu you can:
 Lock the status of the menu.
 Define the transformation ratios.
 Select the number of quadrants and type of installation.
 Select the operation profile of the unit.
 Program the carbon emission ratio, kgCO
2,
.
 Program the cost ratio.
 Program the maximum demand parameters.
 Delete the energy meters and the maximum and minimum values.
 Modify the display's backlight.
 Activate the harmonic display option.
 Program alarms.
 Program Modbus communications
The CVM-C10 does not record programming changes until the programming is complete. If
the unit is RESET before finishing the programming or no key is pressed for 30 seconds, the
configuration will not be stored in the memory.
To enter the programming menu press the key for 3 seconds.
The home screen of the menu indicates whether the menu is locked or not:
When you enter the programming menu you can view and modify
the programming. Icon on the display indicates that the unit
is not locked.
When you enter the programming you can view the programming
but not modify it. Icon indicates the locking status.
Press key to access the first programming step.
The following screen will be displayed if the programming menu is locked:
Enter the password in this screen to modify the programming
parameters.
Press key
for 3 seconds to edit the password. The prog icon
will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly,
increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to modify the other values.
36
CVM-C10
Instruction Manual