Rs-485 communications: protocol, Operating mode of digital input 2, Operating mode of digital input 1 – CIRCUTOR CVM-C10 Series User Manual
Page 56
4�9�26� Operating mode of digital input 1
The function of digital input 1 is selected on this screen.
Press key
for 3 seconds to edit the function selection. The
prog icon will be displayed on the bottom of the screen.
Press key
to browse the two options:
Logic input
Tariff selection.
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
4�9�27� Operating mode of digital input 2
The function of digital input 2 is selected on this screen.
Press key
for 3 seconds to edit the function selection. The
prog icon will be displayed on the bottom of the screen.
Press key
to browse the two options:
Logic input
Tariff selection.
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
4�9�28� RS-485 communications: Protocol
The RS-485 communications protocol is selected on this screen.
Press the
key for 3 seconds to edit the function selection.
The
prog icon will be displayed on the bottom of the screen.
Press key
to browse the two options:
Modbus
BACnet
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
Note: The unit will restart after exiting the setup menu if the RS-485 communications
parameters have been modified.
56
CVM-C10
Instruction Manual