Deleting energy values, Deleting maximum and minimum values, Selecting the cos φ - pf bar on the display – CIRCUTOR CVM-C10 Series User Manual
Page 44: 4�9�13� selecting the cos, Φ - pf, Selecting, The cos φ - pf bar on the display, Deleting maximum, And minimum values
4�9�13� Selecting the Cos
φ - PF
bar on the display
This screen is used to select the Cos
φ - PF
bar viewing option.
Press key
for 3 seconds to edit the selection. The
prog icon
will be displayed on the bottom of the screen.
Press key
to browse the two viewing options.
Displaying the Cos φ.
Displaying the Power Factor
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
4�9�14� Deleting maximum and minimum values
On this screen you select whether or not to delete the maximum
and minimum values
Press key
for 3 seconds to edit the selection. The
prog icon
will be displayed on the bottom of the screen.
Press key
to browse the two options (Yes and No).
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
4�9�15� Deleting energy values
On this screen you select whether or not to delete the energy
values
Press key
for 3 seconds to edit the selection. The
prog icon
will be displayed on the bottom of the screen.
Press key
to browse the two options (Yes and No).
To validate the data, press
for 3 seconds and the
prog icon will disappear from the display.
Press key
to access the next programming step.
44
CVM-C10
Instruction Manual