Activating the harmonics display screen, Selecting the range of energies, Activating the har – CIRCUTOR CVM-C10 Series User Manual

Page 45: Monics display screen

4�9�16� Selecting the Range of energies

The operation of the range of energy is selected on this screen.
Press key

for 3 seconds to edit the selection. The

prog icon

will be displayed on the bottom of the screen.

Press the

key to browse different options:

AUTO

The unit displays the kWh and MWh. When the energy value reaches 999999kWh, the

unit automatically selects the MWh range.

SHORT

The unit only displays the KWh. When the energy value reaches 999999kWh, the unit

resets the measurement to 0kWh.

To validate the modification of the range of energies, delete the energy values first.

To do so, press the

validation key for 3 seconds; the energy value deletion screen will be

displayed. Select YES to delete the energy values; the unit will go back to the energy range

selection screen.
To complete the validation, press the

key for 3 seconds; the prog icon will disappear from

the display.

Press key

to access the next programming step.

4�9�17� Activating the harmonics display screen�

This screen is used to select whether harmonics are displayed

or not.
Press key

for 3 seconds to edit the selection. The

prog icon

will be displayed on the bottom of the screen.
Press key

to browse the two options (Yes and No).

To validate the data, press

for 3 seconds and the

prog icon will disappear from the display.

Press key

to access the next programming step.

Instruction Manual

CVM-C10