Altera DDR Timing Wizard - Manual (Page 5)

Altera Corporation v
November 2007 Preliminary
About this User Guide
Revision History The table below displays the revision history for the chapters in this user
guide.
How to Contact
Altera For the most up-to-date information about Altera products, go to the
Altera world-wide web site at
www.altera.com . For technical support on
this product, go to www.altera.com/mysupport . For additional
information about Altera products, consult the sources shown below.
Chapter Date
Document
Version
Changes Made
All November 2007 3.0 ● Replaced all references to “IP Tool Bench” to “legacy controller
MegaWizard” and “altmemphy” to “ALTMEMPHY”.
● Updated the Entering and Editing Inputs to the DTW section in
Chapter 2. Getting Started for Quartus II 7.2 support.
● Added Chapter 3. Using the dtw_timing_analysis.tcl Script to
replace the Performing Timing Analysis section.
All July 2007 2.1 ● Changed title of referenced document to: AN 413, Using Legacy
Integrated Static Data Path and Controller Megafunction with
Hardcopy II Structured ASICs.
All December 2006 2.0 ● Updated document for Quartus II version 6.1 software.
● Added design flow.
● Introduced dtw_timing_analysis.tcl and usage.
● Introduced the clock uncertainties option.
All May 2006 1.0 ● Initial version of the document.
Information Type USA & Canada All Other Locations
Technical support www.altera.com/mysupport/ www.altera.com/mysupport/
Product literature www.altera.com (1) www.altera.com (1)
Altera literature services [email protected] [email protected]
FTP site ftp.altera.com ftp.altera.com
Note to table:
(1) You can also contact your local Altera sales office or sales representative.