Features, Features -2 – Altera Arria 10 Avalon-MM DMA User Manual
Page 6
Table 1-1: PCI Express Data Throughput
The following table shows the aggregate bandwidth of a PCI Express link for Gen1, Gen2, and Gen3 for 2, 4, and 8
lanes. The protocol specifies 2.5 giga-transfers per second for Gen1, 5.0 giga-transfers per second for Gen2, and
8.0 giga-transfers per second for Gen3. This table provides bandwidths for a single transmit (TX) or receive (RX)
channel. The numbers double for duplex operation. Gen1 and Gen2 use 8B/10B encoding which introduces a 20%
overhead. In contrast, Gen3 uses 128b/130b encoding which reduces the data throughput lost to encoding to less
than 1%.
Units are Gigabits per second (Gbps).
Link Width
×2
×4
×8
PCI Express Gen1 (2.5 Gbps)
N/A
N/A
16 Gbps
PCI Express Gen2 (5.0 Gbps)
N/A
16 Gbps
32 Gbps
PCI Express Gen3 (8.0 Gbps)
15.75 Gbps
31.51 Gbps
63Gbps
Related Information
•
•
•
Features
New features in the Quartus
®
II 15.0 software release:
• Added Enable Altera Debug Master Endpoint (ADME) parameter to support optional Native PHY
register programming with the Altera System Console.
• Added support for downstream burst read with a payload of size up to 4 KBytes, if Enable burst
capability for RXM BAR2 port is turned on in the Parameter Editor. Previous maximum downstream
read request payload size was 512 bytes.
The Arria 10 Avalon-MM DMA for PCI Express supports the following features:
• Complete protocol stack including the Transaction, Data Link, and Physical Layers implemented as
hard IP.
• Native support for Gen1 x8, Gen2 x4, Gen2 x8, Gen3 x4, Gen3 x8 for Endpoints. The variant
downtrains when plugged into a lesser link width or changes to a different maximum link rate.
• Dedicated 16 KByte receive buffer.
• Support for 128- or 256-bit Avalon-MM interface to Application Layer with embedded DMA up to
Gen3 ×8 data rate.
• Support for 32- or 64-bit addressing for the Avalon-MM interface to the Application Layer.
• Qsys example designs demonstrating parameterization, design modules, and connectivity.
• Extended credit allocation settings to better optimize the RX buffer space based on application type.
1-2
Features
UG-01145_avmm_dma
2015.05.14
Altera Corporation
Datasheet