Spectrum Controls 1756sc-OF8H Series A - Manual (Page 89)

Chapter 7: HART Channel Configuration, Data, and Status 75
Table 7.3 (Packet 2)
Tag Name Data Type Style Description
(If8h0 or Of8h0)Packet2 1 Packet2[8,1] NA Two dimensional array containing
packet 2 data for all 8 channels.
(If8h0 or Of8h0)Packet2[X,0] 1,2 Packet2 NA Packet 2 data for channel X
(If8h0 or Of8h0)Packet2[X,0].HartChannelID INT BIN Bits 0 to 3: Channel number (0 – 7).
Bit 4: Searching/Initializing HART device
Bit 5: HART communication failure or
device not found
Bit 6: Pass-through message pending
(ready)
Bit 7: Unused (0)
Bits 8 to 10: Packet ID
Bit 11 through 15: Unused
(If8h0 or Of8h0)Packet2[X,0].Slot0Data REAL Float Variable for slot 0
(If8h0 or Of8h0)Packet2[X,0].Slot1Data REAL Float Variable for slot 1
(If8h0 or Of8h0)Packet2[X,0].Slot2Data REAL Float Variable for slot 2
(If8h0 or Of8h0)Packet2[X,0].Slot3Data REAL Float Variable for slot 3
(If8h0 or Of8h0)Packet2[X,0].Slot0Units SINT DEC Slot 0 units code
(If8h0 or Of8h0)Packet2[X,0].Slot1Units SINT DEC Slot 1 units code
(If8h0 or Of8h0)Packet2[X,0].Slot2Units SINT DEC Slot 2 units code
(If8h0 or Of8h0)Packet2[X,0].Slot3Units SINT DEC Slot 3 units code
(If8h0 or Of8h0)Packet2[X,0].Slot0Assignment SINT DEC Slot 0 variable code
(If8h0 or Of8h0)Packet2[X,0].Slot1Assignment SINT DEC Slot 1 variable code
(If8h0 or Of8h0)Packet2[X,0].Slot2Assignment SINT DEC Slot 2 variable code
(If8h0 or Of8h0)Packet2[X,0].Slot3Assignment SINT DEC Slot 3 variable code
(If8h0 or Of8h0)Packet2[X,0].Pad SINT[12] DEC Packet pad
1
The name in parentheses represents the module tag name (i.e. If8h0 or Of8h0) depending on w hich module is being used.
2
X represents the module channel number (0 to 7)
!
Attention: Slot variables are not acquired Attention: Slot variables are not acquired Attention: Slot variables are not acquired Attention: Slot variables are not acquired Attention: Slot variables are not acquired
automatically by the input module. Therefore, packet 2 automatically by the input module. Therefore, packet 2 automatically by the input module. Therefore, packet 2 automatically by the input module. Therefore, packet 2 automatically by the input module. Therefore, packet 2
is skipped by the auto-acquisition process.
is skipped by the auto-acquisition process. is skipped by the auto-acquisition process. is skipped by the auto-acquisition process. is skipped by the auto-acquisition process.