Spectrum Controls 1756sc-OF8H Series A - Manual (Page 48)

34 ControlLogix ™ Analog HART Modules
Input Tags Overview
The input tags contain the analog data, status, and HART data. As in the
case of the configuration tags, the input tags are also copied to the local
input tags for the module. For details regarding the analog data and status
refer to Chapter 5. For details regarding the HART data refer to Chapter
7.
Note: The local input tags (i.e. Local:e:I) mentioned above are
automatically created when the module was copied from the sample
project in step 1.
Note: The defined configuration tags (If8h0Input) are copied to the local
input tags (Local:e:I) by the ladder in step 4.
Note: The HART data found in the input tags has not been demultiplexed.
In other words, the data is changing dynamically depending on what
channel and which HART packet is currently being scanned. Please refer
to chapter 7 for more details regarding demultiplexing of the HART data.
1756sc-IF8H (If8h0Input)