Spectrum Controls 1756sc-OF8H Series A - Manual (Page 69)

Chapter 6: 1756sc-OF8H Channel Configuration, Data, and Status 55
Table 6.1d
Tag Name Data Type Style Description
Of8h0Configuration.ChXIdleValue 1 FLOAT REAL Defines the value, in engineering
units, the output should take when
the connection transitions to Program
mode. This function is only active
when bit 1 is set in the ChXConfigBits
tag.
Of8h0Configuration.ChXLowSignal 1 FLOAT REAL One of four points used in scaling.
The low signal represents the
minimum output range.
Of8h0Configuration.ChXHighSignal 1 FLOAT REAL One of four points used in scaling.
The high signal represents the
maximum output range.
Of8h0Configuration.ChXLowEngineering 1 FLOAT REAL One of four points used in scaling.
The low engineering represents the
minimum scaled range.
Of8h0Configuration.ChXHighEngineering 1 FLOAT REAL One of four points used in scaling.
The high engineering represents the
maximum scaled range.
Of8h0Configuration.ChXLowClamp 1 FLOAT REAL Defines the minimum analog output
value the channel is allowed to
achieve.
Of8h0Configuration.ChXHighClamp 1 FLOAT REAL Defines the maximum analog output
value the channel is allowed to
achieve.
Of8h0Configuration.ChXCalBias 1 FLOAT REAL A user configurable offset added
directly to the measured analog value
for the channel.
Of8h0Configuration.ChXSlot0Code 1 SINT DEC HART slot 0 transmitter variable
assignment code. Refer to chapter 7
for more information.
Of8h0Configuration.ChXSlot1Code 1 SINT DEC HART slot 1 transmitter variable
assignment code. Refer to chapter 7
for more information.
Of8h0Configuration.ChXSlot2Code 1 SINT DEC HART slot 2 transmitter variable
assignment code. Refer to chapter 7
for more information.
Of8h0Configuration.ChXSlot3Code 1 SINT DEC HART slot 3 transmitter variable
assignment code. Refer to chapter 7
for more information.
1
X represents the module channel number (0 to 7).