Spectrum Controls 1756sc-OF8H Series A - Manual (Page 70)

56 ControlLogix ™ Analog HART Modules
Table 6.1e
Tag Name Data Type Style Description
Of8h0Configuration.HandleTimeout INT DEC There is a handle timeout associated
with the final reply message. After
the module obtaines the requested
information from the HART device, it
will start the HandleTimeout timer
(duration defined by the
HandleTimeout tag). The replay
message will be kept in memory
during the HandleTimeout period.
After the timeout occurs or after the
message is retrieved by the pass-
through response query command,
the storage buffer will be discarded,
and another pass through message
will be serviced without being
rejected. HandleTimeout is in the
range of 1 to 255 seconds.
Of8h0Configuration.ModuleConfigBits INT BIN Module function settings
Of8h0Configuration.ModuleConfigBits.0 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.1 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.2 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.3 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.4 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.5 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.6 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.7 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.8 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.9 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.10 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.11 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.12 BOOL DEC Reserved set to zero
Of8h0Configuration.ModuleConfigBits.13 BOOL DEC Reserved set to zero