Spectrum Controls 1756sc-OF8H Series A - Manual (Page 49)

Chapter 4: Programming Your Module 35
1756sc-OF8H (Of8hInput)
Output Tags
Overview
(OF8H Only)
The output tags are used to control the output voltage or current level,
depending on the configuration settings, of each individual channel.
Note: The local output tags (i.e. Local:e:O) are automatically created
when the module was copied from the sample project in step 1.
Note: The defined output tags (Of8h0Output) are copied to the local
output tags (Local:e:O) by the ladder in step 4.