Spectrum Controls 1756sc-OF8H Series A - Manual (Page 60)

46 ControlLogix ™ Analog HART Modules
Table 5.3c
Tag Name Data Type Style Description
If8h0Input.ChanStatus SINT[8] BIN An array of 8 SINT which display
general status for each channel.
If8h0Input.ChanStatus[X] 1 SINT BIN General channel status byte
If8h0Input.ChanStatus[X].0 1 BOOL DEC User value exceeded high high limit.
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].1 1 BOOL DEC User value exceeded low low limit.
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].2 1 BOOL DEC User value exceeded high limit.
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].3 1 BOOL DEC User value exceeded low limit.
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].4 1 BOOL DEC Specified ramp rate exceeded.
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].5 1 BOOL DEC Over Range alarm
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].6 1 BOOL DEC Under Range alarm
0 = No alarm
1 = Alarm
If8h0Input.ChanStatus[X].7 1 BOOL DEC Channel calibration fault
0 = No fault
1 = Fault
If8h0Input.ChanData REAL[8] FLOAT An array of 8 floating point registers
which display the analog data for
each channel in engineering units.
If8h0Input.ChanData[X] 1 REAL FLOAT Channel analog data in engineering
units
1
X represents the module channel number (0 to 7).