Pitney Bowes RISO ComColor Printer - Manual (Page 31)

29
Preparations for Use >> Paper and Originals
1
6
Move the stopper against the edge of the paper.
When using A4
Be sure to align the stopper against the edge of the
paper. The machine determines the size of the
paper based on the stopper position.
To set A3 paper and B4 paper, place the A3/B4 paper guide
properly for each type. If you pinch both sides of the A3/B4
paper guide, you can slide it out and install it in each paper
size hole.
When using
B4
B4
A3
7
Push the tray back into the machine.
8
On the operation panel, check the tray settings.
When you have switched to a different type or size of paper,
update the feed tray settings. For details, see “Feed tray” (p. 48).
In the Standard Tray
1
Open the standard tray until it stops.
2
Spread the guides.
Set the paper feed guide levers (in two positions on both
sides) to unlock the guides and slide the guides.
3
Load the paper.
Load paper with the printing side face-up.
• When printing on envelopes, it is recommended
to install an optional stacking tray.
• To load envelopes, be sure to leave their flaps
open and load them so that they will be fed from
the bottom.
NO
YES
The [Rotate] feature is convenient when printing on
envelopes from a computer.
ComColor Series Basic Guide 02